Set two elements (4-5). Use two pins (C) Insert the two pins with the narrow side up Insert the finishing element as shown Insert the part shaped like a key to keep the Kryptos from falling apart. Insert the Kryptos key into the opening. Check that all letters are set as desired. Now you can

Repeat actions as described in step 3 for elements 2,3, 4, 5 and Pins (B) Letter «R» Set three elements (4-5-4). Use two pins (B). Use elements 2, 3 and element with letters Letter «C» Set three elements (5-4-5). Use two pins (B). Use elements 2, 3 and element with letters Letter «E» Set three elements (4-5-4). Use

Please note that every «level» contains 3 intermediate elements (4&5) plus the element with the letters Repeat actions as described in step 2 for Three elements (5-4-5). Use two pins (B). Insert the two pins with the wide side down. Repeat actions as described in step 2 for elements 2, 3 Set the «E».

Place the basic element with the iDventure logo facing down on the work surface. Insert the two main pins (part 1) into this base element. Slide part 5 over the main pins all the way down. Press part 5 horizontally against the main pins so that it connects to them. Slide part 4 over the

2 x pins „A“ 10 x pins „B“ 2 x pins „C“ 2 x main pins „1“ 6 x slide parts „2“ 6 x slide parts „3“ 9 x elements „4“ 10 x elements „5“ 6 x elements with letters 1 x base element 1 x finishing element 1 x element shaped like a key 1 x Kryptos key