Resetting the box

Insert the central part and check that its 5 ends are located on 5 bases.

If the marbles locked again before you insert the central part, don’t worry — you can unlock it by taking the following steps:

• Put the central part, so that its ends are located beside 5 bases, but not on them.
• Spin the box rapidly clockwise until the marbles roll to the outer end.
• Press down firmly on the box to prevent the marbles from moving. Then remove the central part carefully and rotate the platform anti-clockwise.
• Insert the central part and check that its 5 ends are located on 5 bases.

Watch the video to see how to unlock the marbles again.

Rotate the central part clockwise to lock it.

Insert the key with an arrow sign and check that it is locked.

Bring one marble to the pusher and the other marble to the initial slot. Then push to open the slot, bring the marble inside and close it.

1. Bring the marble into the slot and shift the left slider up to let the marble fall down below the 1st cross.
2. You need to bring the marble into the empty space on top. To achieve this shift the middle and the right sliders all the way down. Move the marble right and turn over the box so that the marble comes onto the glass. Bring the marble into the slot on the left. Then shift the left and the middle sliders up.
3. Bring the marble to a higher level and turn over the box to prevent the marble from falling. Shift the middle slider down to bring the marble to the 3rd cross where it should fall down.
4. Move the marble left and shift the left slider up. Bring the marble to a higher level and shift the slider down — the marble will come to the 4th cross.
5. Shift the bottom handle of the left slider up and bring the marble to a higher level. Shift the slider down to let it fall below the 5th cross.
6. Shift the right slider down and bring the marble to the 6th cross. Avoid the trap in the middle!
7. Shift the right slider up to bring the marble to the 7th cross.
8. Move the marble right to the 8th cross, then shift the right slider all the way down. Bring the marble to a higher level and shift the slider up.
9. Move the top handle up and the bottom handle down to open the slot for the marble. Bring it to a higher level and shift the slider up.

Bring the marble through the tunnel so that it comes out on the other side. If it doesn’t, check that the gears are set correctly and shake the box so that the marble falls.

Randomly rotate the gears. Let the marble beside the gears come to the left or the right end and then block the knobs.

Unlock the top slider by setting the correct position of the levers and bring the marble to the top.

Set random positions of the levers and insert the scheme.

Bring the marble into the small hollow of the disc with 3 dots and turn it clockwise. The marble will come out below the disc and go through the tunnel.

Bring the marble into the smaller hollow of the 2nd disc and rotate it clockwise. The marble will go through another tunnel.

Turn the disc anti-clockwise and bring the marble into the bigger hollow of the 2nd disc. Turn all discs clockwise.

Bring the marble to the space beside the disc with 1 dot. Then rotate the disc with 3 dots anti-clockwise.

Bring the marble into the smaller hollow and turn the disc anti-clockwise.

Turn all discs clockwise to set the puzzle to the initial state.

Make sure the starting gear has the correct word «START» set on it. Bring the marble into the space behind it and turn the gear randomly.