-> Set two elements (4-5). -> Use two pins (C) -> Insert the two pins with the narrow side up. -> Insert the finishing element as shown. -> Insert the part shaped like a key to keep the Kryptos from falling apart. -> Insert the Kryptos key into the opening. -> Check that all letters

Repeat actions as described in step 3 for elements 2,3, 4, 5 and Pins (B)   Letter „R“ -> Set three elements (4-5-4). -> Use two pins (B). -> Use elements 2, 3 and element with letters Letter „C“ -> Set three elements (5-4-5). -> Use two pins (B). -> Use elements 2, 3 and element with letters

Please note that every „level“ contains 3 intermediate elements (4&5) plus the element with the letters -> Repeat actions as described in step 2 for Three elements (5-4-5). -> Use two pins (B). -> Insert the two pins with the wide side down. -> Repeat actions as described in step 2 for elements 2, 3 ->

-> Place the basic element with the iDventure logo facing down on the work surface. -> Insert the two main pins (part 1) into this base element. -> Slide part 5 over the main pins all the way down. -> Press part 5 horizontally against the main pins so that it connects to them. -> 

2 x pins „A“ 10 x pins „B“ 2 x pins „C“ 2 x main pins „1“ 6 x slide parts „2“ 6 x slide parts „3“ 9 x elements „4“ 10 x elements „5“ 6 x elements with letters 1 x base element 1 x finishing element 1 x element shaped like a key 1 x Kryptos key